INSTALLATION OF ROUND RIDGE VENT-PIPE / ANTENNA RIDGE
Lama ROMAN Round Ridge Vent-Pipe / Antenna Ridge can be installed as per the same method as our standard Roof Tile and standard Round Ridges.
(*) To download the full copy of installation guide please proceed to DOWNLOAD
Lama ROMAN Round Ridge Vent-Pipe / Antenna Ridge can be installed as per the same method as our standard Roof Tile and standard Round Ridges.
- Install the Round Ridge Vent-Pipe/Antenna Ridge as per installation of a standard main tile Roof Tile or standard round ridge.
- Cut a correct sized hole at the top of the elastomer sleeve with a pair of scissors to suit the pipe/rod.
- The cut quality MUST be smooth and radiused. Jaggered cuts may result on the elastomer sleeve tearing upon insertion.
- Insert the pipe/rod into the elastomer sleeve and through the tile/ridge. Insert the two rubber wedges and wedge the pipe firmly between the neck of the tile/ridge.
- Cover the elastomer sleeve over the neck of the tile/ridge.
- Secure the metalized flexible hose to the Pipe using the cable ties supplied. Connect the flexible hose to the septic tank ventilation pipes. For other applications, please use a suitable hose (not supplied).
- Clean the surface of the elastomer sleeve where the pipe/rod exits from the tile/ridge and apply the joint with a silicone based sealant to ensure waterproofing.
